J&B Industrial Sales Co.

1005 Perry Hwy #2
Perrysville, PA 15237

tel 724 368 4800
fax 724 368 4804

Kistler-Morse

J&B Industrial Sales Co. > Manufacturers > Kistler-Morse

A top instrumentation supplier for material storage and process material monitoring systems providing logistics, communications and information solutions. Products include bolt-on strain gages, direct support load stands and load cells, tension load cells, ultrasonic level transducers, weight/level indicators and batch controllers, and are sold through J&B Industrial in Pennsylvania and West Virginia.

Mining
Manufacturing
Biotechnology

Agriculture
Fabrication
Petrochemical

Kistler-Morse Load Cells/Direct Support Sensors

Ideal for reliable, repeatable measurements in applications ranging from sanitary SIP/CIP conditions to rugged outdoor environments.

Kistler-Morse Bolt-on Weighing Systems

Bolt-on strain gauge sensor used on metal legged silos use to determine vessel weight.

Kistler-Morse Weight Indicators/Controllers

Monitor and provide stable and accurate weight readings from 1 to 120 vessels of level, weight or a combination of the two.

Kistler-Morse Ultrasonic Level Systems

Multi-vessel, non-contact solution for measuring level, differential level or flow

Kistler-Morse Remote Monitoring

Adding a weight sensor to your vessel is only the start of the system, collecting and analyzing the data that is provided by the sensor, through a controller, is what really begins to provide valuable information for dry bulk inventory management.
Inventory management is critical; maximizing the reliability and consistency of inventory measurement through the manufacturing process is key.

LD3

The robust and versatile LD3 weight sensor is installed under a load bearing support. This load cell compensates for changes in output due to the natural movement of a vessel.

LD360s

Load cell designed for Sanitary Wash-Down Environments. Simple, self-contained design virtually eliminates bacteria hiding places and withstands rigorous CIP cleaning practices.

LDII

The LDII load cell has the lowest profile for its load ranges in the industry, and uses the proven KM semiconductor strain gauge technology to continuously measure the weight of material for in-process inventory and bulk storage vessels.

LD3xi and LD3xiC

Available with a cage (LD3xiC) or stand-alone (LD3xi), these load cells provide higher accuracies and are best used for in-process applications with smaller capacities.

Load Stand II

The load stand is a direct vessel-to-foundation structural member designed to be a dependable and accurate continuous monitoring and control solution for inventory management.

TC1 and TC2 Tension Cell

Designed for industrial inventory management and process applications; construction is alloy steel with nickel plate for corrosion resistance.

L-Cell

The L-Cell sensor bolts directly to a vessel’s support structure and measures changes in stress of the support, converting a voltage output into a readable weight.

Microcell

The Microcell is an easy to install bolt on strain gauge sensor that produces an electrical output proportional to the changes in weight of a vessel.

SVS 2000

User friendly and easy to configure, the SVS2000 controller provides a weight readout on a local display. The output controls can connect to the KM ORB system or feed into a larger, company wide configuration.

STXplus

As a blind transmitter, the STXPlus controller transmits weight readouts back to a local PLC, but does not have a local display or keypad.

MVS

The MVS is a powerful and versatile, multifunctional signal processor and display for continuous level, weight monitoring and inventory management, and is fully configurable and expandable for up to 120 vessels.

ORB Remote Monitor

The ORB System is a gateway between process instruments and the departments that need the information. It can be configured to show tank shape, capacity and contents; alarms can be programmed to create notifications when certain criteria are met, and reports can be generated to consistently provide data.

Weigh II

The Weigh II controller is a fully featured weighing controller that can monitor up to four separate vessels, consolidating the vessel signals into one single location, saving control room panel space and reducing installation wiring.

Ultra-wave

Configurable for a number of sensors, relays, point level inputs, current loops and PLC interfaces Ultrawave ultrasonic level indicator system can be used for solid or liquid level measurement, open channel flow and inventory management.

L-Cell

The L-Cell sensor bolts directly to a vessel’s support structure and measures changes in stress of the support, converting a voltage output into a readable weight.

Microcell

The Microcell is an easy to install bolt on strain gauge sensor that produces an electrical output proportional to the changes in weight of a vessel.

LD3

The robust and versatile LD3 weight sensor is installed under a load bearing support. This load cell compensates for changes in output due to the natural movement of a vessel.

LD360s

Load cell designed for Sanitary Wash-Down Environments. Simple, self-contained design virtually eliminates bacteria hiding places and withstands rigorous CIP cleaning practices.

LDII

The LDII load cell has the lowest profile for its load ranges in the industry, and uses the proven KM semiconductor strain gauge technology to continuously measure the weight of material for in-process inventory and bulk storage vessels.

LD3xi and LD3xiC

Available with a cage (LD3xiC) or stand-alone (LD3xi), these load cells provide higher accuracies and are best used for in-process applications with smaller capacities.

Load Stand II

The load stand is a direct vessel-to-foundation structural member designed to be a dependable and accurate continuous monitoring and control solution for inventory management.

TC1 and TC2 Tension Cell

Designed for industrial inventory management and process applications; construction is alloy steel with nickel plate for corrosion resistance.

ORB Remote Monitor

The ORB System is a gateway between process instruments and the departments that need the information. It can be configured to show tank shape, capacity and contents; alarms can be programmed to create notifications when certain criteria are met, and reports can be generated to consistently provide data.

Ultra-wave

Configurable for a number of sensors, relays, point level inputs, current loops and PLC interfaces Ultrawave ultrasonic level indicator system can be used for solid or liquid level measurement, open channel flow and inventory management.

SVS 2000

User friendly and easy to configure, the SVS2000 controller provides a weight readout on a local display. The output controls can connect to the KM ORB system or feed into a larger, company wide configuration.

STXplus

As a blind transmitter, the STXPlus controller transmits weight readouts back to a local PLC, but does not have a local display or keypad.

MVS

The MVS is a powerful and versatile, multifunctional signal processor and display for continuous level, weight monitoring and inventory management, and is fully configurable and expandable for up to 120 vessels.

Weigh II

The Weigh II controller is a fully featured weighing controller that can monitor up to four separate vessels, consolidating the vessel signals into one single location, saving control room panel space and reducing installation wiring.

Web design by The Stick Company