1005 Perry Hwy #2
Perrysville, PA 15237
tel 724 368 4800
fax 724 368 4804
Through 90 years of innovation and leadership in air filtration, AAF clean air products and systems offer the most comprehensive clean air solutions available in the world. Our products are the industry benchmarks for quality and performance, from simple roughing filters, to air pollution control, to gas containment removal, to the highest efficiency filters used in the most stringent clean environments.
The FabriPulse® M pulse-jet bag collector meets the needs of industrial dust collection applications that have low air volume and require small, compact filter sizes. It is engineered to give years of efficient service and minimum downtime in continuous duty dust collection applications.
The FabriPulse BV Dust Collector is an effective solution to control dust in silos and bins. Units available with a fan up to 1500CFM.
The AAF OptiFlo® RC cartridge collector is the optimum solution to a wide variety of air quality problems. The advantage is simple: through design optimization and working in synergy with our class-leading REDClean® cartridges, filtration performance is enhanced and the cost of ownership is reduced.
The ArrestAll® shaker dust collector is a compact and efficient solution to small and medium volume dry dust problems. Designed to control dust from a single source or system, the ArrestAll® saves energy by recirculating clean air. The ArrestAll® is great for Woodworking shop dust collection.
The Cyclone® can be used in almost any application that generates dust particles greater than 20 microns in diameter. Use the Cyclone® as your primary collector with or without the optional after-filter, for dusts of moderate to coarse particle size. The Cyclone® will remove up to 99% (by weight) of dust generated by steel grinding and saw dust.
The PulsePak® Prime cartridge dry dust collector is designed to meet today’s high efficiency and compact size requirements for in-plant recirculation installations.
The AAF FabriPulse® Fusion is the optimum solution to a variety of air quality problems and can be tailored to specific application requirements. The FabriPulse® Fusion dust collector can be used as an integral part of processes in a vast range of industries, including chemical, cement, food processing, packaging, mineral extraction and steel.
The venturi shape of the Kinpactor provides the most efficient conversion of potential energy (static pressure) into kinetic energy (velocity), and then allows maximum regain or reconversion of this high velocity back to static pressure as velocity diminishes in the diverging section.
The RotoClone® DownVent is an efficient wet collector for use in metal grinding and metalworking environments.
The RotoClone® LVN wet collector was patterned after the standard RotoClone® N collector, which has been installed in thousands of applications since its introduction in the 1940s. It is an efficient, compact and economical wet-type dust collector specifically designed for volumetric flow rates of 2,500 CFM or less.
The RotoClone® N combines high efficiency, low maintenance costs, simplicity, flexibility and low water usage to maximize performance. The RotoClone® N is a flexible design for a wide range of operating conditions with minimal servicing requirements. The RotoClone® N is an optimal solution for chemical, industrial processes, metal grinding, and metalworking environments.
The RotoClone® W is the most cost effective, high-efficiency wet dust collector in its class. Combining a dust collector with a centrifugal fan, saving space and enhancing its suitable for a wide variety of different applications. The distinguishing feature of the RotoClone® W is the addition of a fine water film on the impeller blades to capture even the smallest of dust particles.
Designed for vertical mounting, the DynaPure® Model A-1 Mist Collector is ideal for gear box vents on air compressors, vacuum pumps or any machine with an oil reservoir which gives off mist as a result of gears operating at high speeds.
The DynaPure® is a unique self-contained filtration system for source capture of mist generated by wet machining, spraying and lubrication systems. The DynaPure® provides increased flexibility and lower maintenance than competitive designs.
The Weld Fume Extractor is a robust filter unit and offers many advantages for frequent use at changing work stations. Equipped with IFA-W3 certified two-stage filtering with increased filter surface and HEPA rated primary filter. The unique “Stay-in-Place” Exhaust Arm swivels 360° to give welders an unmatched freedom of movement with very little effort. The durable steel housing is powder coated and hermetically sealed to ensure no air leaks. In addition, an included filter monitor increases safety for welders and all other personnel. Suitable for welding applications including stainless steel and high chromium content.
Designed to meet the stringent requirements of HEPA filter applications, AstroSeal® Type S housings are engineered to perform reliably, even in the toughest environments.
The Bag In/Bag Out Side Access filter system is a safe, simple, reliable method for removing contaminated particulate filters and/or gas absorbers used for air purification in hazardous environments.
The Side Access Carbon filter housing offers the convenience of servicing the filter from outside the air duct and is especially suited for installations involving limited headroom.
The Side Access Demister housing offers the convenience of servicing the filter from outside the air duct and is especially suited for installations involving limited headroom.
The Side Access Flatbank housing is a general purpose filter housing that provides mechanical strength, ease of use and economy. It is used when only prefilters are required.
The Side Access Leverlock offers the convenience of servicing the filter from outside the air duct and is especially suited for installations involving limited headroom.
The Side Access Polyseal filter housing offers the convenience of servicing the filter from outside the air duct and is especially suited for installations involving limited headroom.
The Side Access Vee-Bank filter offers the convenience of servicing the filter from outside the air duct and is especially suited for installations involving limited headroom.
AAF has a variety of pleated bags to keep your dust collection system operating at peak performance.
AAF’s extensive development program has perfected our filter construction by combining advanced substrates with our range of special medias and coatings to create an unbeatable blend.
AAF has a variety of replacement bags and tubes to keep your dust collection system operating at peak performance.
The FabriPulse® M pulse-jet bag collector meets the needs of industrial dust collection applications that have low air volume and require small, compact filter sizes. It is engineered to give years of efficient service and minimum downtime in continuous duty dust collection applications.
The FabriPulse BV Dust Collector is an effective solution to control dust in silos and bins. Units available with a fan up to 1500CFM.
The AAF OptiFlo® RC cartridge collector is the optimum solution to a wide variety of air quality problems. The advantage is simple: through design optimization and working in synergy with our class-leading REDClean® cartridges, filtration performance is enhanced and the cost of ownership is reduced.
The ArrestAll® shaker dust collector is a compact and efficient solution to small and medium volume dry dust problems. Designed to control dust from a single source or system, the ArrestAll® saves energy by recirculating clean air. The ArrestAll® is great for Woodworking shop dust collection.
The Cyclone® can be used in almost any application that generates dust particles greater than 20 microns in diameter. Use the Cyclone® as your primary collector with or without the optional after-filter, for dusts of moderate to coarse particle size. The Cyclone® will remove up to 99% (by weight) of dust generated by steel grinding and saw dust.
The PulsePak® Prime cartridge dry dust collector is designed to meet today’s high efficiency and compact size requirements for in-plant recirculation installations.
The AAF FabriPulse® Fusion is the optimum solution to a variety of air quality problems and can be tailored to specific application requirements. The FabriPulse® Fusion dust collector can be used as an integral part of processes in a vast range of industries, including chemical, cement, food processing, packaging, mineral extraction and steel.
The venturi shape of the Kinpactor provides the most efficient conversion of potential energy (static pressure) into kinetic energy (velocity), and then allows maximum regain or reconversion of this high velocity back to static pressure as velocity diminishes in the diverging section.
The RotoClone® DownVent is an efficient wet collector for use in metal grinding and metalworking environments.
The RotoClone® LVN wet collector was patterned after the standard RotoClone® N collector, which has been installed in thousands of applications since its introduction in the 1940s. It is an efficient, compact and economical wet-type dust collector specifically designed for volumetric flow rates of 2,500 CFM or less.
The RotoClone® N combines high efficiency, low maintenance costs, simplicity, flexibility and low water usage to maximize performance. The RotoClone® N is a flexible design for a wide range of operating conditions with minimal servicing requirements. The RotoClone® N is an optimal solution for chemical, industrial processes, metal grinding, and metalworking environments.
The RotoClone® W is the most cost effective, high-efficiency wet dust collector in its class. Combining a dust collector with a centrifugal fan, saving space and enhancing its suitable for a wide variety of different applications. The distinguishing feature of the RotoClone® W is the addition of a fine water film on the impeller blades to capture even the smallest of dust particles.
Designed for vertical mounting, the DynaPure® Model A-1 Mist Collector is ideal for gear box vents on air compressors, vacuum pumps or any machine with an oil reservoir which gives off mist as a result of gears operating at high speeds.
The Weld Fume Extractor is a robust filter unit and offers many advantages for frequent use at changing work stations. Equipped with IFA-W3 certified two-stage filtering with increased filter surface and HEPA rated primary filter. The unique “Stay-in-Place” Exhaust Arm swivels 360° to give welders an unmatched freedom of movement with very little effort. The durable steel housing is powder coated and hermetically sealed to ensure no air leaks. In addition, an included filter monitor increases safety for welders and all other personnel. Suitable for welding applications including stainless steel and high chromium content.
Designed to meet the stringent requirements of HEPA filter applications, AstroSeal® Type S housings are engineered to perform reliably, even in the toughest environments.
The Bag In/Bag Out Side Access filter system is a safe, simple, reliable method for removing contaminated particulate filters and/or gas absorbers used for air purification in hazardous environments.
The Side Access Carbon filter housing offers the convenience of servicing the filter from outside the air duct and is especially suited for installations involving limited headroom.
The Side Access Demister housing offers the convenience of servicing the filter from outside the air duct and is especially suited for installations involving limited headroom.
The Side Access Flatbank housing is a general purpose filter housing that provides mechanical strength, ease of use and economy. It is used when only prefilters are required.
The Side Access Leverlock offers the convenience of servicing the filter from outside the air duct and is especially suited for installations involving limited headroom.
The Side Access Polyseal filter housing offers the convenience of servicing the filter from outside the air duct and is especially suited for installations involving limited headroom.
AAF has a variety of pleated bags to keep your dust collection system operating at peak performance.
AAF’s extensive development program has perfected our filter construction by combining advanced substrates with our range of special medias and coatings to create an unbeatable blend.
AAF has a variety of replacement bags and tubes to keep your dust collection system operating at peak performance.
